Assist Springs
Get the best of both worlds, Swift Assist Springs provide a dynamic step linear rate.
Like our helper springs, the assist springs are designed to be fully compressed at static height. Every one of our assist springs compress to the exact same height. This allows drivers to change assist springs without resetting the perch on the coilovers so the ride height isn’t affected. Heavier rates of assist springs over helper springs are used to fine tune the rebound travel of the shock. These springs can also help preventing a loss of traction due to inside wheel lift during hard cornering.
DUE TO CONTINUED ENGINEERING ADVANCES, PRODUCT SPECIFICATION MAY CHANGE WITHOUT NOTICE.
Assist Springs
Assist Springs
SOLD IN PAIRS.
| kgf/mm | lbs/inch | mm | inch | mm | inch | mm | inch | mm | lbs | 60mm(2.25") comes with Stack Spring Adapter | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A60-072-040 | 4.0 | 224 | 72 | 2.8 | 42 | 1.7 | 30 | 1.2 | 165 | 364 |
|
| A60-072-050 | 5.0 | 280 | 72 | 2.8 | 42 | 1.7 | 30 | 1.2 | 210 | 463 |
|
| A60-072-060 | 6.0 | 336 | 72 | 2.8 | 42 | 1.7 | 30 | 1.2 | 280 | 617 |
|
65mm(2.56") comes with Stack Spring Adapter |
| A65-068-040 | 4.0 | 224 | 68 | 2.7 | 41 | 1.6 | 27 | 1.1 | 155 | 342 |
|
| A65-068-050 | 5.0 | 280 | 68 | 2.7 | 41 | 1.6 | 27 | 1.1 | 200 | 441 |
|
| A65-068-060 | 6.0 | 336 | 68 | 2.7 | 41 | 1.6 | 27 | 1.1 | 260 | 573 |
|
Helper Springs
Prevent dismounting your springs without changing spring rates.
Unlike our assist springs, our helper springs are specifically designed to have a minimal effect on the springs rate of the main coilover springs. Helper springs allow the springs to stay on mounted on the coilover perch when the shock is under negative or zero load, also known as droop travel. It is ideal to run helper springs on setups where you cannot preload the main spring due to height issues or when experiencing springs coming loose from the coilover perch.
DUE TO CONTINUED ENGINEERING ADVANCES, PRODUCT SPECIFICATION MAY CHANGE WITHOUT NOTICE.
Helper Springs
Helper Springs
SOLD IN PAIRS.
| kgf/mm | lbs/inch | mm | inch | mm | inch | mm | inch | mm | lbs | Flat Wire Helper Springs - 60mm(2.25") comes with Stack Spring Adapter | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| H60-135-0008 | 0.1 | 4 | 135 | 5.3 | 118 | 4.6 | 17 | 0.7 | 10 | 22 |
|
| H60-070-008 | 0.8 | 45 | 70 | 2.8 | 43 | 1.7 | 27 | 1.1 | 40 | 88 |
|
| H60-060-015 | 1.5 | 84 | 60 | 2.4 | 41 | 1.6 | 19 | 0.7 | 70 | 154 |
|
| H60-060-030 | 3.0 | 168 | 60 | 2.4 | 38 | 1.5 | 22 | 0.9 | 120 | 265 |
|
Flat Wire Helper Springs - 65mm(2.2") comes with Stack Spring Adapter |
| H65-135-0008 | 0.08 | 4 | 135 | 5.3 | 118 | 4.6 | 17 | 0.7 | 10 | 22 |
|
| H65-070-008 | 0.8 | 45 | 70 | 2.8 | 46 | 1.8 | 24 | 0.9 | 43 | 95 |
|
| H65-060-015 | 1.5 | 84 | 60 | 2.4 | 39 | 1.5 | 21 | 0.8 | 70 | 154 |
|
| H65-060-030 | 3.0 | 168 | 60 | 2.4 | 36 | 1.4 | 24 | 0.9 | 120 | 265 |
|
Flat Wire Helper Springs - 70mm(2.75") |
| H70-070-008 | 0.8 | 45 | 70 | 2.8 | 48 | 1.9 | 22 | 0.9 | 45 | 99 |
|
Flat Wire Helper Springs - 2.5"(65mm)
Sold as 1 spring |
| H025-135-0008 | 0.08 | 4 | 135 | 5.3 | 118 | 4.6 | 17 | 0.7 | 10 | 22 |
|
| H025-152-050 | 0.9 | 50 | 152 | 6.0 | 107 | 4.2 | 45 | 1.8 | 97 | 214 |
|
| H025-127-075 | 1.34 | 75 | 127 | 5.0 | 94 | 3.7 | 33 | 1.3 | 128 | 282 |
|
| H025-127-100 | 1.78 | 100 | 127 | 5.0 | 93 | 3.7 | 34 | 1.3 | 167 | 368 |
|
Flat Wire Helper Springs - 1.88"
Sold as 1 spring |
| H188-035-0005 | 0.1 | 5 | 89 | 4.5 | 66 | 2.6 | 23 | 0.9 | - | 0.35 |
|
| H188-035-0012 | 0.2 | 12 | 89 | 3.5 | 66 | 2.6 | 23 | 0.9 | - | 0.4 |
|
| H188-035-0025 | 0.4 | 25 | 89 | 3.5 | 66 | 2.6 | 23 | 0.9 | - | 064 |
|
| H188-035-0050 | 0.9 | 50 | 89 | 3.5 | 64 | 2.5 | 25 | 1.0 | - | 0.64 |
|
Round Wire Helper Springs - 3.0"(76mm)
SOLD IN PAIRS. |
| H030-040-250 | 4.5 | 250 | 102 | 4.0 | 59 | 2.3 | 43 | 1.7 | 265 | 584 |
|